Latest PortaPack +HackRF One SDR + TXCO +Metal Case +Havoc for GPS simulator

Description

package including  hackrf one with portapack and a metal case  and a  antenna ,the  havoc firmware is installed
Add a PortaPack  to your HackRF One software-defined radio, and leave your laptop behind! The PortaPack  attaches to your HackRF and adds a touchscreen LCD, navigation controls, headphone jack, real-time clock, micro SD card slot,
Just add a USB battery, and you're ready to explore radio spectrum wherever you are. The PortaPack firmware runs on the fast ARM processors in your HackRF. No computer is necessary (except for reprogramming firmware).
HAVOC FEATURES INCLUDE
IQ file replay
Microphone FM transmit with CTCSS
CTCSS decoder
Frequency manager (save & load from SD card, with categories and notes)
File manager
"Soundboard" wave file player (put 8-bit mono files in SD card /wav directory)
ADS-B receiver with map view
SSTV transmitter
Fully configurable transmit signals
POCSAG transmitter
POCSAG receiver/decoder
Morse transmitter (FM tone and CW)
OOK transmitter for common remote encoders (PT2262, doorbells, remote outlets, some garage doors, ...)
RDS (Radio Data System) PSN, RadioText and Time groups transmitter
Meteorological radiosonde receiver for M10 and M2K2...
AFSK receiver
AFSK transmitter (Bell202...)
Nuoptix DTMF sync transmitter
TouchTunes jukebox universal remote
LCR (Language de Commande Routier) message generator
Street lighting control transmitter (CCIR tones)
"Play Dead" in case of emergency
Fully configurable RF signal generator
RSSI audio output as pitch (for direction finding)
SPECIFICATIONS
2.4 inch, 240 x 320 RGB LCD with touch panel.
Four-way arrow keys, rotary jog wheel, and select button.
Coin battery for preserving settings and date/time.
Micro SD card slot for data and code storage
Some features demonstrated in 2016 February 22 firmware video:
SSB, AM, narrowband FM, wideband FM audio reception, with spectrum waterfall
.
Wideband (18MHz) spectrum analysis and waterfall.
Monitoring of boat (AIS), automobile (TPMS), and utility meter transponders (ITRON ERT).
HackRF mode runs HackRF firmware for use with host computer SDR software.
PPM calibration for more accurate tuning.
Sleep mode saves power by turning off just the display.
You may also find the Furrtek HAVOC firmware very interesting!
Your HackRF will continue to function with computer-based SDR software, when you put the PortaPack into "HackRF Mode".
PortaPack is compatible only with the HackRF One. It is not compatible with the earlier HackRF Jawbreaker design. If you have an RF shield installed on your HackRF, the PortaPack should fit just fine. Compatibility with the HackRF Blue is experimental. One Blue owner has reported good results with minor mechanical interference between the PortaPack audio capacitors and the baseband header. If your HackRF Blue does not have a baseband header installed, you should have no mechanical problems.
PortaPack  requires an external battery. Any USB-connected battery should work, though they vary widely in quality and poorly-designed batteries may inject voltage regulator noise into the radio.
The PortaPack and HackRF One will not replace your handheld ham radio receiver. Receive sensitivity varies from band to band, but will not perform as well as a true ham radio receive