Holley Sniper 550-510 EFI Shiny Finish w/Distributor Kit, SBC/BBC

Description

Breathe new life into your Small Block Chevy or Big Block Chevy engine with this easy-to-install fuel injection/distributor ignition kit, Throttle body mounted ECU - no extra computers to mount or relocate, Self tuning ECU means you dont have to be a computer/tuning expert to enjoy EFI, Capable of supporting up to 650 HP, Precision machined shutter wheel designed for improved accuracy at extreme engine RPM
Holley Sniper 550-510 EFI Shiny Finish w/Distributor Kit, SBC/BBC
Sku # 9109289
Mfr. Part # 9109289
Condition
New
Brand
Holley Sniper
Sold
Kit
Details
Info
Breathe new life into your Small Block Chevy or Big Block Chevy engine with this easy-to-install fuel injection/distributor ignition kit!
Kit Includes:
(1) Holley Sniper 550-510 EFI 4150 4-Barrel Self-Tuning Base Kit
(1) Holley 565-200 EFI Dual Sync Distributor, SBC & BBC
(1) Holley Sniper 558-493 EFI Dual Sync Distributor Harness
(1) Chevy Distributor Clamp
Holley Sniper 550-510 EFI 4150 4-Barrel Self-Tuning Base Kit
Direct carburetor replacement
Fits single and dual plane intake manifolds
Naturally aspirated applications only
Throttle body mounted ECU - no extra computers to mount or relocate
Capable of supporting up to 650 HP
Simple, 4 wire connection (Battery +, Battery -, Switched ignition & RPM)
Built in pre-set fuel pressure regulator
Integrated ignition timing control & coil driver
Color touchscreen for easy setup and gauge displays
Self tuning ECU means you dont have to be a computer/tuning expert to enjoy EFI
Chrome finish
Holley 565-200 EFI Dual Sync Distributor, SBC & BBC
Plug and Play with Holley EFI
Includes both crank and cam sensors to support sequential EFI operation
Hall Effect sensor design provides precise timing control and noise immunity
CNC machined billet aluminum housing
Integrated LEDs allow for easy setup
Available for popular applications
Comes with hardened steel distributor gear
Precision machined shutter wheel designed for improved accuracy at extreme engine RPM
Shutter wheel is pinned and welded to distributor shaft for superior reliability
Blank cap available for Coil-On-Plug applications
Holley Sniper 558-493 EFI Dual Sync Distributor Harness
Quite literally a snap to put in - Plug and play installation
Simply plug both connectors in and you are finished!
The pink wire will need to be terminated to a 12 volt ignition source as well
Chevy Distributor Clamp
Extra heavy duty distributor clamp
Gives more hold-down area for your Small Block Chevy (SBC) or Big Block Chevy (BBC)
Holley Sniper 550-510 EFI 4150 4-Barrel Self-Tuning Base Kit
(more details)
Put an end to mysterious air/fuel ratios, jet changes, and cold-start rough idle troubles with Holley Sniper EFI. Affordable aftermarket fuel injection is here and it couldn't be any easier to install on your vehicle. Holley Sniper EFI is a perfect match for any muscle car, classic truck, street rod, or nearly any other carbureted vehicle. Economically priced to save your hard earned money for other parts of your build; Holley Sniper EFI is a self-tuning, plug and play fuel injection system that takes all the trouble and guesswork out of your switch to modern electronic fuel injection. With over 100 years of building quality fuel systems, you can trust Holley Sniper with all your electronic fuel injection needs!
Holley Sniper EFI is packed with all the features that your car or truck needs. This throttle body fuel injection replaces any square bore or spread bore style 4-barrel carburetor. The built in ECU keeps the wiring neat and tidy with no need to run the computer and associated wiring back into the cab of the vehicle. Connect the 4 necessary wires and you're good to go. The self-learning ECU takes care of setting the baseline tune while the full touchscreen display allows you to fine tune as you please. Sniper EFI throttle bodies utilize OEM style TPS and IAC modules for dependable and serviceable use. Life is too short to hassle with cold start issues, hesitations, flooding, and carburetor inconsistencies. Leave that old 4-barrel to rest and bring in a new era of performance, reliability, and fun with a Holley Sniper EFI system!
Holley 565-200 EFI Dual Sync Distributor, SBC & BBC
(more details)
Introducing the next generation of Holley EFI Dual Sync Distributors, the new design features an improved shutter wheel, high-quality dual Hall Effect sensors, and an MSD cap and rotor! While these distributors are designed to be used primarily in sequentially injected installations, you can easily use them as a crank trigger for TBI system also. The precision machined shutter wheel design ensures accurate timing, even at very high engine speeds. The Gen 2 Dual Sync also included a QPQ coated shutter wheel for superior corrosion resistance, and the wheel has been pinned and welded to the shaft for increased reliability. These distributors can also be used with other EFI systems that support Hall Effect crank and cam sensor inputs. Do you need to a bronze gear for your billet cam? No problem, these distributors maintain MSD shaft diameters, making it easy to source a bronze gear!
Charts
(PDF)
(PDF)
(PDF)
Specs
Finish
Polished
Sold in Quantity
Kit
CFM
800 CFM
Carburetor Flange Type
4-Barrel Square Bore
Injection Style
Throttle Body
Metering Style
Speed density
Intake Manifold Included
No
Throttle Body Included
Yes
Distributor Included
Yes
Wiring Harness Included
Yes
EGR
No
Fuel Pump Included
No
Injectors Included
Yes
Fuel Rails Included
No
Calibration Module Included
Yes
TPS Sensor Included
Yes
IAC Motor Included
Yes
ECM Included
Yes
Fuel Pressure Regulator Included
No
MAP Sensor Included
Yes
IAT Sensor Included
Yes
Venturi Quantity
4
Self Tuning
Yes
Throttle Body Barrels
4-Barrel
Throttle Body Material
Cast Aluminum
Throttle Body Finish
Polished
User Tunable
Yes
Injector Size
100 lbs./hr.
Use with Power Adder
No
Max Horsepower Rating
650
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.